Reply #2: Reds and bugundy are [View All]

[LiberalUprising]

horrible to get a consistant coverage with, though it can be done.

As stated above use a primer, either Kilz or Zinnser that has a tint of your color to it, though most times when tinting a primer red it will turn pink, this is ok. Be prepared to apply 4 - 5 coats of your topcoat paint.

Let each coat dry completly before applying consecutive coats. On the final coat paint to a wet edge (ie. do not let previous area painted dry), two people work well for this, have one cut in and the other roll behind him. Start the cut in first.

The above is impotant especially if you are using a satin or eggshell finish. Also be aware if using a satin or eggshell finish that you will not be able to touch it up without seeing the spot where you did the touch up. A flat or semigloss is much more forgiving for touch ups, but on dark colors should still be done as explained above, if not you will see the sheen difference when paint dries.

Use a lambswool roller sleeve for better coverage, I usually use a 3/4 or 1 inch nap for walls and a quality brush (Purdy makes the best), they are more expensive but will save you time cutting in a good edge and will last a year or longer with everyday use.

Also stay away from Home Depot and Lowes paints, they are harder to work with and will require more coats that Sherwin Williams, Ben Moore or other quality paint store brands. You will may pay a couple dollars more per gallon but the time and aggravation saved will be worth it.

Whatever you do DO NOT USE RALPH LAUREN, it is sheer crap.

(on edit)
Have you thought about doing a burgundy wash over the green?


Hope this helps